/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6ul.dtsi"
#include "imx6ul-tx6ul.dtsi"
/ {
model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
aliases {
lcdif-24bit-pins-a = &pinctrl_disp0_3;
mmc0 = &usdhc1;
/delete-property/ mmc1;
serial2 = &uart3;
serial4 = &uart5;
};
/delete-node/ sound;
};
&can1 {
xceiver-supply = <®_3v3>;
};
&can2 {
xceiver-supply = <®_3v3>;
};
&ds1339 {
status = "disabled";
};
&fec1 {
pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
/delete-node/ mdio;
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
phy-supply = <®_3v3_etn>;
phy-handle = <&etnphy1>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
etnphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy0_int>;
interrupt-parent = <&gpio5>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
status = "okay";
};
etnphy1: ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy1_int>;
interrupt-parent = <&gpio4>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
status = "okay";
};
};
};
&i2c_gpio {
status = "disabled";
};
&i2c2 {
/delete-node/ codec@a;
/delete-node/ touchscreen@48;
rtc: rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
};
&kpp {
status = "disabled";
};
&lcdif {
pinctrl-0 = <&pinctrl_disp0_3>;
};
®_usbotg_vbus {
status = "disabled";
};
&usdhc1 {
pinctrl-0 = <&pinctrl_usdhc1>;
non-removable;
/delete-property/ cd-gpios;
cap-sdio-irq;
};
&uart1 {
pinctrl-0 = <&pinctrl_uart1>;
/delete-property/ uart-has-rtscts;
};
&uart2 {
pinctrl-0 = <&pinctrl_uart2>;
/delete-property/ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart7>;
status = "okay";
};
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8>;
status = "disabled"; /* conflicts with LCDIF */
};
&iomuxc {
hoggrp {
fsl,pins = <
MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x0b0b0 /* WLAN_RESET */
>;
};
pinctrl_disp0_3: disp0grp-3 {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10
/* LCD_DATA08..09 not wired */
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10
/* LCD_DATA16..17 not wired */
MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10
MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10
MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10
MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10
MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10
MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10
>;
};
pinctrl_enet2_mdio: enet2-mdiogrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0b0b0
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x0b0b0
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0b0b0
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0
MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x0b0b0
MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x0b0b0
>;
};
pinctrl_uart7: uart7grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0b0b0
MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x0b0b0
>;
};
pinctrl_uart8: uart8grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0b0b0
MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x0b0b0
>;
};
};