// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2025 Cunhao Lu <1579567540@qq.com>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
#include "rk3588-lubancat-5-btb.dtsi"
/ {
compatible = "embedfire,lubancat-5io", "embedfire,lubancat-5-btb",
"rockchip,rk3588";
model = "EmbedFire LubanCat 5IO";
aliases {
ethernet0 = &gmac0;
ethernet1 = &gmac1;
mmc1 = &sdmmc;
rtc0 = &hym8563;
};
chosen {
stdout-path = "serial2:1500000n8";
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
button-recovery {
label = "Recovery";
press-threshold-microvolt = <1750>;
linux,code = <KEY_VENDOR>;
};
};
analog-sound {
compatible = "simple-audio-card";
pinctrl-0 = <&hp_detect>;
pinctrl-names = "default";
simple-audio-card,format = "i2s";
simple-audio-card,hp-det-gpios =
<&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "rk3588-es8388";
simple-audio-card,pin-switches = "Headphones", "Speaker";
simple-audio-card,routing =
"Headphones", "LOUT1",
"Headphones", "ROUT1",
"Speaker", "LOUT2",
"Speaker", "ROUT2",
"LINPUT1", "Main Mic",
"LINPUT2", "Main Mic",
"RINPUT1", "Headset Mic",
"RINPUT2", "Headset Mic";
simple-audio-card,widgets =
"Headphone", "Headphones",
"Speaker", "Speaker",
"Microphone", "Main Mic",
"Microphone", "Headset Mic";
simple-audio-card,codec {
sound-dai = <&es8388>;
system-clock-frequency = <12288000>;
};
simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
};
};
hdmi0-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi0_con_in: endpoint {
remote-endpoint = <&hdmi0_out_con>;
};
};
};
hdmi1-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi1_con_in: endpoint {
remote-endpoint = <&hdmi1_out_con>;
};
};
};
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&ir_receiver_pin>;
pinctrl-names = "default";
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&sys_led_pin>;
pinctrl-names = "default";
led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
cooling-levels = <0 100 150 200 255>;
fan-supply = <&vcc_5v0_s0>;
pwms = <&pwm11 0 5000 0>;
};
regulator-mipi-dsi0-power {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mipi_dsi0_power_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-name = "mipi_dsi0_power";
vin-supply = <&vcc_5v0_s0>;
};
regulator-mipi-dsi1-power {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mipi_dsi1_power_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-name = "mipi_dsi1_power";
vin-supply = <&vcc_5v0_s0>;
};
sata_power: regulator-sata-power {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sata_power_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-name = "sata_power";
vin-supply = <&vcc12v_dcin>;
};
vbus5v0_typec: regulator-vbus5v0-typec {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&typec_vbus_en>;
pinctrl-names = "default";
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "vbus5v0_typec";
vin-supply = <&vcc5v0_usb_s0>;
};
vcc3v3_ekey_pcie: regulator-vcc3v3-ekey-pcie {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc3v3_ekey_pcie_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc3v3_ekey_pcie";
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_m2_pcie: regulator-vcc3v3-m2-pcie {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc3v3_m2_pcie_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc3v3_m2_pcie";
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_mini_pcie: regulator-vcc3v3-mini-pcie {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc3v3_mini_pcie_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc3v3_mini_pcie";
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_pciex4: regulator-vcc3v3-pciex4 {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc3v3_pcie_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc3v3_pciex4";
vin-supply = <&vcc12v_dcin>;
};
vcc4v0_sys: regulator-vcc4v0-sys {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <4000000>;
regulator-min-microvolt = <4000000>;
regulator-name = "vcc4v0_sys";
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_usb20_host: regulator-vcc5v0-usb20-host {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc5v0_usb20_host_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "vcc5v0_usb20_host";
vin-supply = <&vcc5v0_usb_s0>;
};
vcc5v0_usb20_hub: regulator-vcc5v0-usb20-hub {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc5v0_usb20_hub_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "vcc5v0_usb20_hub";
vin-supply = <&vcc5v0_usb_s0>;
};
vcc5v0_usb30_otg: regulator-vcc5v0-usb30-otg {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc5v0_usb30_otg_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "vcc5v0_usb30_otg";
vin-supply = <&vcc5v0_usb_s0>;
};
vcc5v0_usb_s0: regulator-vcc5v0-usb-s0 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "vcc5v0_usb_s0";
vin-supply = <&vcc12v_dcin>;
};
vcc12v_dcin: regulator-vcc12v-dcin {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <12000000>;
regulator-min-microvolt = <12000000>;
regulator-name = "vcc12v_dcin";
};
vcc_3v3_s0: regulator-vcc-3v3-s0 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_3v3_s0";
vin-supply = <&vcc12v_dcin>;
};
vcc_3v3_sd_s3: regulator-vcc-3v3-sd-s3 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_3v3_sd_s3";
vin-supply = <&vcc_3v3_s3>;
};
vcc_5v0_s0: regulator-vcc-5v0-s0 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "vcc_5v0_s0";
vin-supply = <&vcc12v_dcin>;
};
};
&can1 {
pinctrl-0 = <&can1m1_pins>;
status = "okay";
};
&can2 {
pinctrl-0 = <&can2m0_pins>;
status = "okay";
};
&combphy0_ps {
status = "okay";
};
&combphy1_ps {
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&dp0 {
status = "okay";
};
&dp0_in {
dp0_in_vp2: endpoint {
remote-endpoint = <&vp2_out_dp0>;
};
};
&dp0_out {
dp0_out_con: endpoint {
remote-endpoint = <&usbdp_phy0_dp_in>;
};
};
&gmac0 {
clock_in_out = "output";
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii-id";
phy-supply = <&vcc_3v3_s0>;
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
pinctrl-names = "default";
status = "okay";
};
&gmac1 {
clock_in_out = "output";
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii-id";
phy-supply = <&vcc_3v3_s0>;
pinctrl-0 = <&gmac1_miim
&gmac1_tx_bus2
&gmac1_rx_bus2
&gmac1_rgmii_clk
&gmac1_rgmii_bus>;
pinctrl-names = "default";
status = "okay";
};
&hdmi0 {
frl-enable-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd
&hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_tx_on_h>;
pinctrl-names = "default";
status = "okay";
};
&hdmi0_in {
hdmi0_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi0>;
};
};
&hdmi0_out {
hdmi0_out_con: endpoint {
remote-endpoint = <&hdmi0_con_in>;
};
};
&hdmi0_sound {
status = "okay";
};
&hdmi1 {
frl-enable-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
&hdmim0_tx1_scl &hdmim0_tx1_sda &hdmi1_tx_on_h>;
pinctrl-names = "default";
status = "okay";
};
&hdmi1_in {
hdmi1_in_vp1: endpoint {
remote-endpoint = <&vp1_out_hdmi1>;
};
};
&hdmi1_out {
hdmi1_out_con: endpoint {
remote-endpoint = <&hdmi1_con_in>;
};
};
&hdmi1_sound {
status = "okay";
};
&hdmi_receiver_cma {
status = "okay";
};
&hdmi_receiver {
hpd-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin
&hdmim1_rx_scl &hdmim1_rx_sda
&hdmirx_det>;
pinctrl-names = "default";
status = "okay";
};
&hdptxphy0 {
status = "okay";
};
&hdptxphy1 {
status = "okay";
};
&i2c0 {
gpio@21 {
compatible = "nxp,pca9535";
reg = <0x21>;
#gpio-cells = <2>;
gpio-controller;
vcc-supply = <&vcc_3v3_s0>;
};
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-output-names = "hym8563";
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&hym8563_int>;
pinctrl-names = "default";
wakeup-source;
};
};
&i2c1 {
usb-typec@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&usbc0_int>;
pinctrl-names = "default";
vbus-supply = <&vbus5v0_typec>;
status = "okay";
connector {
compatible = "usb-c-connector";
data-role = "dual";
label = "USB-C";
op-sink-microwatt = <1000000>;
power-role = "dual";
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
source-pdos =
<PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
try-power-role = "source";
altmodes {
displayport {
svid = /bits/ 16 <0xff01>;
vdo = <0xffffffff>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usbc0_hs: endpoint {
remote-endpoint = <&usb_host0_xhci_hs>;
};
};
port@1 {
reg = <1>;
usbc0_ss: endpoint {
remote-endpoint = <&usbdp_phy0_ss_out>;
};
};
port@2 {
reg = <2>;
usbc0_sbu: endpoint {
remote-endpoint = <&usbdp_phy0_dp_out>;
};
};
};
};
};
};
&i2c7 {
pinctrl-0 = <&i2c7m0_xfer>;
pinctrl-names = "default";
status = "okay";
es8388: audio-codec@11 {
compatible = "everest,es8388", "everest,es8328";
reg = <0x11>;
AVDD-supply = <&avcc_3v3_s0>;
DVDD-supply = <&vcc_1v8_s3>;
HPVDD-supply = <&avcc_3v3_s0>;
PVDD-supply = <&vcc_1v8_s3>;
assigned-clock-rates = <12288000>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
#sound-dai-cells = <0>;
};
};
&i2s0_8ch {
pinctrl-0 = <&i2s0_lrck
&i2s0_mclk
&i2s0_sclk
&i2s0_sdi0
&i2s0_sdo0>;
pinctrl-names = "default";
status = "okay";
};
&i2s5_8ch {
status = "okay";
};
&i2s6_8ch {
status = "okay";
};
&mdio0 {
rgmii_phy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
};
};
&mdio1 {
rgmii_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
};
};
&package_thermal {
polling-delay = <1000>;
cooling-maps {
map0 {
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
trip = <&package_fan0>;
};
map1 {
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
trip = <&package_fan1>;
};
};
trips {
package_fan0: package-fan0 {
hysteresis = <2000>;
temperature = <55000>;
type = "active";
};
package_fan1: package-fan1 {
hysteresis = <2000>;
temperature = <65000>;
type = "active";
};
};
};
&pcie30phy {
data-lanes = <1 1 2 2>;
status = "okay";
};
/* M.2 M-Key (NVMe) */
&pcie3x4 {
num-lanes = <2>;
pinctrl-0 = <&pcie3x4_rst>;
pinctrl-names = "default";
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_m2_pcie>;
status = "okay";
};
/* PCIe x4 slot */
&pcie3x2 {
pinctrl-0 = <&pcie3x2_rst>;
pinctrl-names = "default";
reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pciex4>;
status = "okay";
};
/* M.2 E-Key (WiFi/BT) */
&pcie2x1l0 {
pinctrl-0 = <&pcie2x1l0_rst &ekey_disable>;
pinctrl-names = "default";
reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_ekey_pcie>;
status = "okay";
};
/* Mini-PCIe */
&pcie2x1l1 {
pinctrl-0 = <&pcie2x1l1_rst &minipcie_disable>;
pinctrl-names = "default";
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_mini_pcie>;
status = "okay";
};
&pinctrl {
hdmi-tx {
hdmi0_tx_on_h: hdmi0-tx-on-h {
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
hdmi1_tx_on_h: hdmi1-tx-on-h {
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hdmirx {
hdmirx_det: hdmirx-det {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir-receiver {
ir_receiver_pin: ir-receiver-pin {
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
sys_led_pin: sys-led-pin {
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
mipi {
mipi_dsi0_power_en: mipi-dsi0-power-en {
rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
mipi_dsi1_power_en: mipi-dsi1-power-en {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie2 {
ekey_disable: ekey-disable {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
minipcie_disable: minipcie-disable {
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie2x1l0_rst: pcie2x1l0-rst {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie2x1l1_rst: pcie2x1l1-rst {
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie3 {
pcie3x2_rst: pcie3x2-rst {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie3x4_rst: pcie3x4-rst {
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sata {
sata_power_en: sata-power-en {
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sound {
hp_detect: hp-detect {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb-typec {
typec_vbus_en: typec-vbus-en {
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbc0_int: usbc0-int {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
vcc3v3_ekey_pcie_en: vcc3v3-ekey-pcie-en {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en {
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc3v3_pcie_en: vcc3v3-pcie-en {
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb20_hub_en: vcc5v0-usb20-hub-en {
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb30_otg_en: vcc5v0-usb30-otg-en {
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm0 {
pinctrl-0 = <&pwm0m2_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm1 {
pinctrl-0 = <&pwm1m2_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm7 {
status = "disabled";
};
&pwm11 {
pinctrl-0 = <&pwm11m2_pins>;
pinctrl-names = "default";
status = "okay";
};
&saradc {
vref-supply = <&avcc_1v8_s0>;
status = "okay";
};
&sata0 {
status = "okay";
sata-port@0 {
target-supply = <&sata_power>;
};
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <200000000>;
no-mmc;
no-sdio;
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
pinctrl-names = "default";
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_sd_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&u2phy0 {
status = "okay";
};
&u2phy0_otg {
status = "okay";
};
&u2phy1 {
status = "okay";
};
&u2phy1_otg {
phy-supply = <&vcc5v0_usb30_otg>;
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc5v0_usb20_host>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_usb20_hub>;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
pinctrl-names = "default";
status = "okay";
};
&uart4 {
pinctrl-0 = <&uart4m2_xfer>;
pinctrl-names = "default";
status = "okay";
};
&uart7 {
pinctrl-0 = <&uart7m2_xfer>;
pinctrl-names = "default";
status = "okay";
};
&usbdp_phy0 {
mode-switch;
orientation-switch;
sbu1-dc-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
sbu2-dc-gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
usbdp_phy0_ss_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&usbc0_ss>;
};
usbdp_phy0_ss_in: endpoint@1 {
reg = <1>;
remote-endpoint = <&usb_host0_xhci_ss>;
};
usbdp_phy0_dp_in: endpoint@2 {
reg = <2>;
remote-endpoint = <&dp0_out_con>;
};
usbdp_phy0_dp_out: endpoint@3 {
reg = <3>;
remote-endpoint = <&usbc0_sbu>;
};
};
};
&usbdp_phy1 {
rockchip,dp-lane-mux = <2 3>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
usb-role-switch;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usb_host0_xhci_hs: endpoint {
remote-endpoint = <&usbc0_hs>;
};
};
port@1 {
reg = <1>;
usb_host0_xhci_ss: endpoint {
remote-endpoint = <&usbdp_phy0_ss_in>;
};
};
};
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
dr_mode = "host";
status = "okay";
};
/*
* combphy2_psu is shared between usb_host2_xhci (USB3) and pcie2x1l1 (PCIe).
* Disable USB3 host2 so the PHY can be used for the Mini-PCIe slot.
*/
&usb_host2_xhci {
status = "disabled";
};
&vop {
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi0_in_vp0>;
};
};
&vp1 {
vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
reg = <ROCKCHIP_VOP2_EP_HDMI1>;
remote-endpoint = <&hdmi1_in_vp1>;
};
};
&vp2 {
vp2_out_dp0: endpoint@a {
reg = <ROCKCHIP_VOP2_EP_DP0>;
remote-endpoint = <&dp0_in_vp2>;
};
};