// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023-2026 Marek Vasut
*/
/dts-v1/;
/plugin/;
#include "imx8mm-data-modul-edm-sbc-overlay-edm-mod-imx8mm-common.dtsi"
&{/} {
reg_panel_bl_supply: regulator-panel-bl-supply {
compatible = "regulator-gpio";
regulator-type = "voltage";
regulator-name = "PANEL_BL_SUPPLY";
enable-gpios = <&gpiolvds 0 0>;
enable-active-high;
status = "okay";
/*
* MP2328 voltage divider settings:
* R1=51k1
* R2=5k62 with optional series Rs=2k21 (12V)
*
* 1 / Rx = (1 / R2) [ + (1 / Rs)][ + (1 / Rt)]
* Vout = 0.5 + ((R1 / Rx) * 0.5)
*/
gpios = <&gpiolvds 1 GPIO_ACTIVE_HIGH>; /* 12V */
states = <5000000 0x0>,
<12000000 0x1>;
/* Default setting: lowest supported voltage. */
gpios-states = <1>; /* Default GPIO state is HIGH, so 12V0 out */
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
};
&lcdif2 {
status = "okay";
};
&lvds_bridge {
status = "okay";
};
&pwm1 {
status = "okay";
};
®_backlight_en_level {
gpios = <&gpiolvds 5 GPIO_ACTIVE_HIGH>; /* SEL_EN */
};
®_backlight_pwm_level {
gpios = <&gpiolvds 4 GPIO_ACTIVE_HIGH>; /* SEL_PWM */
};
®_panel_bl {
gpio = <&gpiowifi 0 0>;
vin-supply = <®_panel_bl_supply>;
};
®_panel_vcc {
enable-gpios = <&gpiowifi 4 0>;
/*
* MP2328 voltage divider settings:
* R1=51k1
* R2=9k09 with optional series Rs=14k7 (5V) or Rt=2k94 (12V)
*
* 1 / Rx = (1 / R2) [ + (1 / Rs)][ + (1 / Rt)]
* Vout = 0.5 + ((R1 / Rx) * 0.5)
*/
gpios = <&gpiolvds 2 GPIO_ACTIVE_HIGH>, /* 5V */
<&gpiolvds 3 GPIO_ACTIVE_HIGH>; /* 12V */
states = <3300000 0x0>,
<5000000 0x1>,
<12000000 0x2>,
<14000000 0x3>;
};