// SPDX-License-Identifier: GPL-2.0
/*
* ARM Ltd. Versatile Express
*
* CoreTile Express A15x2 A7x3
* Cortex-A15_A7 MPCore (V2P-CA15_A7)
*
* HBI-0249A
*/
/dts-v1/;
#include "vexpress-v2m-rs1.dtsi"
/ {
model = "V2P-CA15_CA7";
arm,hbi = <0x249>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
aliases {
serial0 = &v2m_serial0;
serial1 = &v2m_serial1;
serial2 = &v2m_serial2;
serial3 = &v2m_serial3;
i2c0 = &v2m_i2c_dvi;
i2c1 = &v2m_i2c_pcie;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
cci-control-port = <&cci_control1>;
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <990>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
cci-control-port = <&cci_control1>;
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <990>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
capacity-dmips-mhz = <516>;
dynamic-power-coefficient = <133>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
capacity-dmips-mhz = <516>;
dynamic-power-coefficient = <133>;
};
cpu4: cpu@4 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
cci-control-port = <&cci_control2>;
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
capacity-dmips-mhz = <516>;
dynamic-power-coefficient = <133>;
};
idle-states {
CLUSTER_SLEEP_BIG: cluster-sleep-big {
compatible = "arm,idle-state";
local-timer-stop;
entry-latency-us = <1000>;
exit-latency-us = <700>;
min-residency-us = <2000>;
};
CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
compatible = "arm,idle-state";
local-timer-stop;
entry-latency-us = <1000>;
exit-latency-us = <500>;
min-residency-us = <2500>;
};
};
};
memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* Chipselect 2 is physically at 0x18000000 */
vram: vram@18000000 {
/* 8 MB of designated video RAM */
compatible = "shared-dma-pool";
reg = <0 0x18000000 0 0x00800000>;
no-map;
};
};
wdt@2a490000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0 0x2a490000 0 0x1000>;
interrupts = <0 98 4>;
clocks = <&oscclk6a>, <&oscclk6a>;
clock-names = "wdog_clk", "apb_pclk";
};
hdlcd@2b000000 {
compatible = "arm,hdlcd";
reg = <0 0x2b000000 0 0x1000>;
interrupts = <0 85 4>;
clocks = <&hdlcd_clk>;
clock-names = "pxlclk";
};
memory-controller@2b0a0000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0 0x2b0a0000 0 0x1000>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
gic: interrupt-controller@2c001000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
<0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
};
cci@2c090000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0x2c090000 0 0x1000>;
ranges = <0x0 0x0 0x2c090000 0x10000>;
cci_control1: slave-if@4000 {
compatible = "arm,cci-400-ctrl-if";
interface-type = "ace";
reg = <0x4000 0x1000>;
};
cci_control2: slave-if@5000 {
compatible = "arm,cci-400-ctrl-if";
interface-type = "ace";
reg = <0x5000 0x1000>;
};
pmu@9000 {
compatible = "arm,cci-400-pmu,r0";
reg = <0x9000 0x5000>;
interrupts = <0 105 4>,
<0 101 4>,
<0 102 4>,
<0 103 4>,
<0 104 4>;
};
};
memory-controller@7ffd0000 {
compatible = "arm,pl354", "arm,primecell";
reg = <0 0x7ffd0000 0 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
dma@7ff00000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0 0x7ff00000 0 0x1000>;
interrupts = <0 92 4>,
<0 88 4>,
<0 89 4>,
<0 90 4>,
<0 91 4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
scc@7fff0000 {
compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
reg = <0 0x7fff0000 0 0x1000>;
interrupts = <0 95 4>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
pmu-a15 {
compatible = "arm,cortex-a15-pmu";
interrupts = <0 68 4>,
<0 69 4>;
interrupt-affinity = <&cpu0>,
<&cpu1>;
};
pmu-a7 {
compatible = "arm,cortex-a7-pmu";
interrupts = <0 128 4>,
<0 129 4>,
<0 130 4>;
interrupt-affinity = <&cpu2>,
<&cpu3>,
<&cpu4>;
};
oscclk6a: oscclk6a {
/* Reference 24MHz clock */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "oscclk6a";
};
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
oscclk0 {
/* A15 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk0";
};
oscclk1 {
/* A15 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk1";
};
oscclk2 {
/* A7 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk2";
};
oscclk3 {
/* A7 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk3";
};
oscclk4 {
/* External AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk4";
};
hdlcd_clk: oscclk5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
freq-range = <23750000 165000000>;
#clock-cells = <0>;
clock-output-names = "oscclk5";
};
smbclk: oscclk6 {
/* Static memory controller clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk6";
};
oscclk7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk7";
};
oscclk8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
freq-range = <20000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk8";
};
volt-a15 {
/* A15 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "A15 Vcore";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "A15 Vcore";
};
volt-a7 {
/* A7 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
regulator-name = "A7 Vcore";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "A7 Vcore";
};
amp-a15 {
/* Total current for the two A15 cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "A15 Icore";
};
amp-a7 {
/* Total current for the three A7 cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 1>;
label = "A7 Icore";
};
temp-dcc {
/* DCC internal temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
power-a15 {
/* Total power for the two A15 cores */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "A15 Pcore";
};
power-a7 {
/* Total power for the three A7 cores */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 1>;
label = "A7 Pcore";
};
energy-a15 {
/* Total energy for the two A15 cores */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 0>, <13 1>;
label = "A15 Jcore";
};
energy-a7 {
/* Total energy for the three A7 cores */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 2>, <13 3>;
label = "A7 Jcore";
};
};
etb@20010000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
in-ports {
port {
etb_in_port: endpoint {
remote-endpoint = <&replicator_out_port0>;
};
};
};
};
tpiu@20030000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0x20030000 0 0x1000>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
in-ports {
port {
tpiu_in_port: endpoint {
remote-endpoint = <&replicator_out_port1>;
};
};
};
};
replicator {
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
remote-endpoint = <&etb_in_port>;
};
};
port@1 {
reg = <1>;
replicator_out_port1: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
};
in-ports {
port {
replicator_in_port0: endpoint {
remote-endpoint = <&funnel_out_port0>;
};
};
};
};
funnel@20040000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_out_port0: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_in_port0: endpoint {
remote-endpoint = <&ptm0_out_port>;
};
};
port@1 {
reg = <1>;
funnel_in_port1: endpoint {
remote-endpoint = <&ptm1_out_port>;
};
};
port@2 {
reg = <2>;
funnel_in_port2: endpoint {
remote-endpoint = <&etm0_out_port>;
};
};
/* Input port #3 is for ITM, not supported here */
port@4 {
reg = <4>;
funnel_in_port4: endpoint {
remote-endpoint = <&etm1_out_port>;
};
};
port@5 {
reg = <5>;
funnel_in_port5: endpoint {
remote-endpoint = <&etm2_out_port>;
};
};
};
};
ptm@2201c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201c000 0 0x1000>;
cpu = <&cpu0>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
port {
ptm0_out_port: endpoint {
remote-endpoint = <&funnel_in_port0>;
};
};
};
};
ptm@2201d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201d000 0 0x1000>;
cpu = <&cpu1>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
port {
ptm1_out_port: endpoint {
remote-endpoint = <&funnel_in_port1>;
};
};
};
};
etm@2203c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203c000 0 0x1000>;
cpu = <&cpu2>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
port {
etm0_out_port: endpoint {
remote-endpoint = <&funnel_in_port2>;
};
};
};
};
etm@2203d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203d000 0 0x1000>;
cpu = <&cpu3>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
port {
etm1_out_port: endpoint {
remote-endpoint = <&funnel_in_port4>;
};
};
};
};
etm@2203e000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203e000 0 0x1000>;
cpu = <&cpu4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
out-ports {
port {
etm2_out_port: endpoint {
remote-endpoint = <&funnel_in_port5>;
};
};
};
};
smb: bus@8000000 {
ranges = <0x8000000 0 0x8000000 0x18000000>;
};
site2: hsb@40000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x3fef0000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 3>;
interrupt-map = <0 0 &gic 0 36 4>,
<0 1 &gic 0 37 4>,
<0 2 &gic 0 38 4>,
<0 3 &gic 0 39 4>;
};
};
&nor_flash {
/*
* Unfortunately, accessing the flash disturbs the CPU idle states
* (suspend) and CPU hotplug of this platform. For this reason, flash
* hardware access is disabled by default on this platform alone.
*/
status = "disabled";
};