[
    {
        "BriefDescription": "Counts the number of cycles when any of the floating point dividers are active.",
        "Counter": "0,1,2,3,4,5,6,7",
        "CounterMask": "1",
        "EventCode": "0xcd",
        "EventName": "ARITH.FPDIV_ACTIVE",
        "SampleAfterValue": "1000003",
        "UMask": "0x2",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Cycles when floating-point divide unit is busy executing divide or square root operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "CounterMask": "1",
        "EventCode": "0xb0",
        "EventName": "ARITH.FPDIV_ACTIVE",
        "PublicDescription": "Counts cycles when divide unit is busy executing divide or square root operations. Accounts for floating-point operations only.",
        "SampleAfterValue": "1000003",
        "UMask": "0x1",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts the number of active floating point dividers per cycle in the loop stage.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xcd",
        "EventName": "ARITH.FPDIV_OCCUPANCY",
        "SampleAfterValue": "1000003",
        "UMask": "0x2",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of floating point divider uops executed per cycle.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xcd",
        "EventName": "ARITH.FPDIV_UOPS",
        "SampleAfterValue": "1000003",
        "UMask": "0x8",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts all microcode FP assists.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc1",
        "EventName": "ASSISTS.FP",
        "PublicDescription": "Counts all microcode Floating Point assists.",
        "SampleAfterValue": "100003",
        "UMask": "0x2",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "ASSISTS.SSE_AVX_MIX",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc1",
        "EventName": "ASSISTS.SSE_AVX_MIX",
        "SampleAfterValue": "1000003",
        "UMask": "0x10",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_DISPATCHED.V0",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb3",
        "EventName": "FP_ARITH_DISPATCHED.V0",
        "SampleAfterValue": "2000003",
        "UMask": "0x1",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_DISPATCHED.V1",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb3",
        "EventName": "FP_ARITH_DISPATCHED.V1",
        "SampleAfterValue": "2000003",
        "UMask": "0x2",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_DISPATCHED.V2",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb3",
        "EventName": "FP_ARITH_DISPATCHED.V2",
        "SampleAfterValue": "2000003",
        "UMask": "0x4",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_DISPATCHED.V3",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb3",
        "EventName": "FP_ARITH_DISPATCHED.V3",
        "SampleAfterValue": "2000003",
        "UMask": "0x8",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_DISPATCHED.V4",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb3",
        "EventName": "FP_ARITH_DISPATCHED.V4",
        "SampleAfterValue": "2000003",
        "UMask": "0x10",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_DISPATCHED.V5",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb3",
        "EventName": "FP_ARITH_DISPATCHED.V5",
        "SampleAfterValue": "2000003",
        "UMask": "0x20",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x4",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x8",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x10",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x20",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x40",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x80",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x1",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_INST_RETIRED.SCALAR_HALF",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_HALF",
        "SampleAfterValue": "100003",
        "UMask": "0x100",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Number of all Scalar Half-Precision FP arithmetic instructions(1) retired - regular and complex.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_HALF_WCOMPLEX",
        "SampleAfterValue": "100003",
        "UMask": "0x300",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x2",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_INST_RETIRED.VECTOR_128B",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.VECTOR_128B",
        "SampleAfterValue": "100003",
        "UMask": "0x40c",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_INST_RETIRED.VECTOR_256B",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.VECTOR_256B",
        "SampleAfterValue": "100003",
        "UMask": "0x830",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_INST_RETIRED.VECTOR_512B",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_INST_RETIRED.VECTOR_512B",
        "SampleAfterValue": "100003",
        "UMask": "0x10c0",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.128B_PACKED_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x4",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.128B_PACKED_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x8",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_OPS_RETIRED.16_FLOPS",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.16_FLOPS",
        "SampleAfterValue": "100003",
        "UMask": "0x880",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_OPS_RETIRED.1_FLOPS",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.1_FLOPS",
        "SampleAfterValue": "100003",
        "UMask": "0x103",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.256B_PACKED_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x10",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.256B_PACKED_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x20",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_OPS_RETIRED.2_FLOPS",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.2_FLOPS",
        "SampleAfterValue": "100003",
        "UMask": "0x204",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_OPS_RETIRED.32_FLOPS",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.32_FLOPS",
        "SampleAfterValue": "100003",
        "UMask": "0x1000",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single and 256-bit packed double precision FP instructions retired; some instructions will count twice as noted below.  Each count represents 2 or/and 4 computation operations, 1 for each element.  Applies to SSE* and AVX* packed single precision and packed double precision FP instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.4_FLOPS",
        "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision and 256-bit packed double precision  floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 or/and 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point and packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x18",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.512B_PACKED_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x40",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.512B_PACKED_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x80",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision and 512-bit packed double precision  FP instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, 1 for each element.  Applies to SSE* and AVX* packed single precision and double precision FP instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RSQRT14 RCP RCP14 DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.8_FLOPS",
        "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision and 512-bit packed double precision  floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision and double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RSQRT14 RCP RCP14 DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x460",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired; some instructions will count twice as noted below.  Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 RANGE SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.SCALAR",
        "PublicDescription": "Number of SSE/AVX computational scalar single precision and double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "1000003",
        "UMask": "0x3",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.SCALAR_DOUBLE",
        "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x1",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.SCALAR_SINGLE",
        "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "100003",
        "UMask": "0x2",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Number of any Vector retired FP arithmetic instructions",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.VECTOR",
        "PublicDescription": "Number of any Vector retired FP arithmetic instructions.  The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
        "SampleAfterValue": "1000003",
        "UMask": "0x3c",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_OPS_RETIRED.VECTOR_128B",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.VECTOR_128B",
        "SampleAfterValue": "100003",
        "UMask": "0x40c",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_OPS_RETIRED.VECTOR_256B",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.VECTOR_256B",
        "SampleAfterValue": "100003",
        "UMask": "0x830",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "FP_ARITH_OPS_RETIRED.VECTOR_512B",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_ARITH_OPS_RETIRED.VECTOR_512B",
        "SampleAfterValue": "100003",
        "UMask": "0x10c0",
        "Unit": "cpu_core"
    },
    {
        "BriefDescription": "Counts the number of retired packed 256 bit floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.256B_PACKED",
        "SampleAfterValue": "1000003",
        "UMask": "0x5fe0",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed 512 bit floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.512B_PACKED",
        "SampleAfterValue": "1000003",
        "UMask": "0x9fe0",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the total number of retired floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.ALL",
        "SampleAfterValue": "1000003",
        "UMask": "0x1fff",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the total number of retired floating point FMA arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.FMA",
        "SampleAfterValue": "1000003",
        "UMask": "0x3fff",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.PACKED",
        "SampleAfterValue": "1000003",
        "UMask": "0x1fe0",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed 128 bit or 256 bit double precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.PACKED_DP",
        "SampleAfterValue": "1000003",
        "UMask": "0x1000",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed 128 bit or 256 bit half precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.PACKED_HP",
        "SampleAfterValue": "1000003",
        "UMask": "0x40",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed 128 bit or 256 bit half precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.PACKED_HP_CMPLX3",
        "SampleAfterValue": "1000003",
        "UMask": "0x100",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed 128 bit or 256 bit half precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.PACKED_HP_CMPLX4",
        "SampleAfterValue": "1000003",
        "UMask": "0x200",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed 128 bit or 256 bit half precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.PACKED_HP_DOT_PROD",
        "SampleAfterValue": "1000003",
        "UMask": "0x80",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired packed 128 bit or 256 bit single precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.PACKED_SP",
        "SampleAfterValue": "1000003",
        "UMask": "0x800",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired scalar 64 bit double precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.SCALAR_DP",
        "SampleAfterValue": "1000003",
        "UMask": "0x10",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired scalar 16 bit half precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.SCALAR_HP",
        "SampleAfterValue": "1000003",
        "UMask": "0x1",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired scalar 16 bit half precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.SCALAR_HP_CMPLX3",
        "SampleAfterValue": "1000003",
        "UMask": "0x2",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired scalar 16 bit half precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.SCALAR_HP_CMPLX4",
        "SampleAfterValue": "1000003",
        "UMask": "0x4",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired scalar 32 bit single precision floating point arithmetic operations.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc8",
        "EventName": "FP_ARITH_RETIRED.SCALAR_SP",
        "SampleAfterValue": "1000003",
        "UMask": "0x8",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 256 bit double precision instructions. Requires SW to use a multiplier of 2.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.256B_PACKED_DP",
        "SampleAfterValue": "1000003",
        "UMask": "0x5000",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 256 bit half precision instructions. Requires SW to use a multiplier of 8.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.256B_PACKED_HP",
        "SampleAfterValue": "1000003",
        "UMask": "0x4040",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 256 bit single precision instructions. Requires SW to use a multiplier of 4.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.256B_PACKED_SP",
        "SampleAfterValue": "1000003",
        "UMask": "0x4800",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 512 bit double precision instructions. Requires SW to use a multiplier of 2.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.512B_PACKED_DP",
        "SampleAfterValue": "1000003",
        "UMask": "0x9000",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 512 bit half precision instructions. Requires SW to use a multiplier of 8.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.512B_PACKED_HP",
        "SampleAfterValue": "1000003",
        "UMask": "0x8040",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 512 bit single precision instructions. Requires SW to use a multiplier of 4.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.512B_PACKED_SP",
        "SampleAfterValue": "1000003",
        "UMask": "0x8800",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 128 bit or 256 bit double precision instructions. Requires SW to use a multiplier of 2.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.PACKED_DP",
        "SampleAfterValue": "1000003",
        "UMask": "0x1000",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 128 bit or 256 bit half precision instructions. Requires SW to use a multiplier of 8.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.PACKED_HP",
        "SampleAfterValue": "1000003",
        "UMask": "0x40",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 128 bit or 256 bit half precision complex instructions. Requires SW to use a multiplier of 24.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.PACKED_HP_CMPLX3",
        "SampleAfterValue": "1000003",
        "UMask": "0x100",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 128 bit or 256 bit half precision complex instructions. Requires SW to use a multiplier of 32.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.PACKED_HP_CMPLX4",
        "SampleAfterValue": "1000003",
        "UMask": "0x200",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 128 bit or 256 bit half precision instructions. Requires SW to use a multiplier of 16.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.PACKED_HP_DOT_PROD",
        "SampleAfterValue": "1000003",
        "UMask": "0x80",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of packed 128 bit or 256 bit single precision instructions. Requires SW to use a multiplier of 4.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.PACKED_SP",
        "SampleAfterValue": "1000003",
        "UMask": "0x800",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of scalar 64 bit double precision instructions. Requires no SW multiplier.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SCALAR_DP",
        "SampleAfterValue": "1000003",
        "UMask": "0x10",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of scalar 16 bit half precision instructions. Requires no SW multiplier.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SCALAR_HP",
        "SampleAfterValue": "1000003",
        "UMask": "0x1",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of scalar 16 bit half precision complex instructions. Requires SW to use a multiplier of 3.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SCALAR_HP_CMPLX3",
        "SampleAfterValue": "1000003",
        "UMask": "0x2",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of scalar 16 bit half precision complex instructions. Requires SW to use a multiplier of 4 .",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SCALAR_HP_CMPLX4",
        "SampleAfterValue": "1000003",
        "UMask": "0x4",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations of scalar 32 bit single precision instructions. Requires no SW multiplier.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SCALAR_SP",
        "SampleAfterValue": "1000003",
        "UMask": "0x8",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 16.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_16X",
        "SampleAfterValue": "1000003",
        "UMask": "0x80",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 1.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_1X",
        "SampleAfterValue": "1000003",
        "UMask": "0x19",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 24.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_24X",
        "SampleAfterValue": "1000003",
        "UMask": "0x100",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 2.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_2X",
        "SampleAfterValue": "1000003",
        "UMask": "0x1000",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 32.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_32X",
        "SampleAfterValue": "1000003",
        "UMask": "0x600",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 3.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_3X",
        "SampleAfterValue": "1000003",
        "UMask": "0x2",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 4.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_4X",
        "SampleAfterValue": "1000003",
        "UMask": "0x804",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of retired floating point operations that require a SW multiplier of 8.  A summation of all SW multiplied events is required in order to calculate total FLOPS.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc7",
        "EventName": "FP_FLOPS_RETIRED.SW_8X",
        "SampleAfterValue": "1000003",
        "UMask": "0x40",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of uops executed on all floating point ports.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb2",
        "EventName": "FP_VINT_UOPS_EXECUTED.ALL",
        "SampleAfterValue": "1000003",
        "UMask": "0x1f",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 0.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb2",
        "EventName": "FP_VINT_UOPS_EXECUTED.P0",
        "SampleAfterValue": "1000003",
        "UMask": "0x2",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 1.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb2",
        "EventName": "FP_VINT_UOPS_EXECUTED.P1",
        "SampleAfterValue": "1000003",
        "UMask": "0x4",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 2.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb2",
        "EventName": "FP_VINT_UOPS_EXECUTED.P2",
        "SampleAfterValue": "1000003",
        "UMask": "0x8",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 3.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb2",
        "EventName": "FP_VINT_UOPS_EXECUTED.P3",
        "SampleAfterValue": "1000003",
        "UMask": "0x10",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 0, 1, 2, 3.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb2",
        "EventName": "FP_VINT_UOPS_EXECUTED.PRIMARY",
        "SampleAfterValue": "1000003",
        "UMask": "0x1e",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of uops executed on floating point and vector integer store data port.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xb2",
        "EventName": "FP_VINT_UOPS_EXECUTED.STD",
        "SampleAfterValue": "1000003",
        "UMask": "0x1",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of floating point operations retired that required microcode assist.",
        "Counter": "0,1,2,3,4,5,6,7",
        "EventCode": "0xc3",
        "EventName": "MACHINE_CLEARS.FP_ASSIST",
        "PublicDescription": "Counts the number of floating point operations retired that required microcode assist, which is not a reflection of the number of FP operations, instructions or uops.",
        "SampleAfterValue": "1000003",
        "UMask": "0x4",
        "Unit": "cpu_atom"
    },
    {
        "BriefDescription": "Counts the number of floating point divide uops retired (x87 and sse, including x87 sqrt).",
        "Counter": "0,1,2,3,4,5,6,7",
        "Data_LA": "1",
        "EventCode": "0xc2",
        "EventName": "UOPS_RETIRED.FPDIV",
        "PublicDescription": "Counts the number of floating point divide uops retired (x87 and sse, including x87 sqrt). Available PDIST counters: 0,1",
        "SampleAfterValue": "1000003",
        "UMask": "0x40",
        "Unit": "cpu_atom"
    }
]