# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor maintainers: - Ricardo Ribalda <ribalda@kernel.org> description: | The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with an active array size of 4224H x 3200V. It is programmable through an I2C interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum throughput of 1.2Gbps/lane. allOf: - $ref: ../video-interface-devices.yaml# properties: compatible: const: sony,imx214 reg: enum: - 0x10 - 0x1a clocks: description: Reference to the xclk clock. maxItems: 1 clock-frequency: description: Frequency of the xclk clock in Hz. enable-gpios: description: GPIO descriptor for the enable pin. maxItems: 1 vdddo-supply: description: Chip digital IO regulator (1.8V). vdda-supply: description: Chip analog regulator (2.7V). vddd-supply: description: Chip digital core regulator (1.12V). flash-leds: true lens-focus: true port: $ref: /schemas/graph.yaml#/$defs/port-base description: | Video output port. properties: endpoint: $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false properties: data-lanes: anyOf: - items: - const: 1 - const: 2 - items: - const: 1 - const: 2 - const: 3 - const: 4 link-frequencies: true required: - data-lanes - link-frequencies additionalProperties: false required: - compatible - reg - clocks - clock-frequency - enable-gpios - vdddo-supply - vdda-supply - vddd-supply - port additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; camera-sensor@1a { compatible = "sony,imx214"; reg = <0x1a>; vdddo-supply = <&pm8994_lvs1>; vddd-supply = <&camera_vddd_1v12>; vdda-supply = <&pm8994_l17>; lens-focus = <&ad5820>; enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; clocks = <&camera_clk>; clock-frequency = <24000000>; port { imx214_ep: endpoint { data-lanes = <1 2 3 4>; link-frequencies = /bits/ 64 <480000000>; remote-endpoint = <&csiphy0_ep>; }; }; }; }; ...