Directory Files
.. 2
File Size
Kconfig 981 B
Makefile 434 B
bh.c 14 kB
bh.h 822 B
cw1200.h 8.3 kB
cw1200_core.mod.c 0 B
cw1200_sdio.c 9.3 kB
cw1200_spi.c 11 kB
cw1200_wlan_sdio.mod.c 0 B
cw1200_wlan_spi.mod.c 0 B
debug.c 11 kB
debug.h 1.9 kB
fwio.c 12 kB
fwio.h 1.0 kB
hwbus.h 920 B
hwio.c 7.2 kB
hwio.h 7.8 kB
main.c 17 kB
pm.c 9.0 kB
pm.h 1.2 kB
queue.c 15 kB
queue.h 3.3 kB
scan.c 13 kB
scan.h 1.6 kB
sta.c 65 kB
sta.h 4.7 kB
txrx.c 39 kB
txrx.h 3.1 kB
wsm.c 44 kB
wsm.h 48 kB

Linux v6.6.1 - cw1200

# SPDX-License-Identifier: GPL-2.0-only
config CW1200
	tristate "CW1200 WLAN support"
	depends on MAC80211 && CFG80211
	help
	  This is a driver for the ST-E CW1100 & CW1200 WLAN chipsets.
	  This option just enables the driver core, see below for
	  specific bus support.

if CW1200

config CW1200_WLAN_SDIO
	tristate "Support SDIO platforms"
	depends on CW1200 && MMC
	help
	  Enable support for the CW1200 connected via an SDIO bus.
	  By default this driver only supports the Sagrad SG901-1091/1098 EVK
	  and similar designs that utilize a hardware reset circuit. To
	  support different CW1200 SDIO designs you will need to override
	  the default platform data by calling cw1200_sdio_set_platform_data()
	  in your board setup file.

config CW1200_WLAN_SPI
	tristate "Support SPI platforms"
	depends on CW1200 && SPI
	help
	  Enables support for the CW1200 connected via a SPI bus.  You will
	  need to add appropriate platform data glue in your board setup
	  file.

endif