// SPDX-License-Identifier: GPL-2.0 /* * KFR2R09 LCD panel support * * Copyright (C) 2009 Magnus Damm * * Register settings based on the out-of-tree t33fb.c driver * Copyright (C) 2008 Lineo Solutions, Inc. */ #include <linux/delay.h> #include <linux/err.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/gpio.h> #include <video/sh_mobile_lcdc.h> #include <mach/kfr2r09.h> #include <cpu/sh7724.h> /* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is * communicating with the main port of the LCDC using an 18-bit SYS interface. * * The device code for this LCD module is 0x01221517. */ static const unsigned char data_frame_if[] = { 0x02, /* WEMODE: 1=cont, 0=one-shot */ 0x00, 0x00, 0x00, /* EPF, DFM */ 0x02, /* RIM[1] : 1 (18bpp) */ }; static const unsigned char data_panel[] = { 0x0b, 0x63, /* 400 lines */ 0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00, }; static const unsigned char data_timing[] = { 0x00, 0x00, 0x13, 0x08, 0x08, }; static const unsigned char data_timing_src[] = { 0x11, 0x01, 0x00, 0x01, }; static const unsigned char data_gamma[] = { 0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00, 0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00, }; static const unsigned char data_power[] = { 0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a, }; static unsigned long read_reg(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { return so->read_data(sohandle); } static void write_reg(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so, int i, unsigned long v) { if (i) so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */ else so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */ } static void write_data(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so, unsigned char const *data, int no_data) { int i; for (i = 0; i < no_data; i++) write_reg(sohandle, so, 1, data[i]); } static unsigned long read_device_code(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { unsigned long device_code; /* access protect OFF */ write_reg(sohandle, so, 0, 0xb0); write_reg(sohandle, so, 1, 0x00); /* deep standby OFF */ write_reg(sohandle, so, 0, 0xb1); write_reg(sohandle, so, 1, 0x00); /* device code command */ write_reg(sohandle, so, 0, 0xbf); mdelay(50); /* dummy read */ read_reg(sohandle, so); /* read device code */ device_code = ((read_reg(sohandle, so) & 0xff) << 24); device_code |= ((read_reg(sohandle, so) & 0xff) << 16); device_code |= ((read_reg(sohandle, so) & 0xff) << 8); device_code |= (read_reg(sohandle, so) & 0xff); return device_code; } static void write_memory_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { write_reg(sohandle, so, 0, 0x2c); } static void clear_memory(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { int i; /* write start */ write_memory_start(sohandle, so); /* paint it black */ for (i = 0; i < (240 * 400); i++) write_reg(sohandle, so, 1, 0x00); } static void display_on(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { /* access protect off */ write_reg(sohandle, so, 0, 0xb0); write_reg(sohandle, so, 1, 0x00); /* exit deep standby mode */ write_reg(sohandle, so, 0, 0xb1); write_reg(sohandle, so, 1, 0x00); /* frame memory I/F */ write_reg(sohandle, so, 0, 0xb3); write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if)); /* display mode and frame memory write mode */ write_reg(sohandle, so, 0, 0xb4); write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */ /* panel */ write_reg(sohandle, so, 0, 0xc0); write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel)); /* timing (normal) */ write_reg(sohandle, so, 0, 0xc1); write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing)); /* timing (partial) */ write_reg(sohandle, so, 0, 0xc2); write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing)); /* timing (idle) */ write_reg(sohandle, so, 0, 0xc3); write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing)); /* timing (source/VCOM/gate driving) */ write_reg(sohandle, so, 0, 0xc4); write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src)); /* gamma (red) */ write_reg(sohandle, so, 0, 0xc8); write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma)); /* gamma (green) */ write_reg(sohandle, so, 0, 0xc9); write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma)); /* gamma (blue) */ write_reg(sohandle, so, 0, 0xca); write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma)); /* power (common) */ write_reg(sohandle, so, 0, 0xd0); write_data(sohandle, so, data_power, ARRAY_SIZE(data_power)); /* VCOM */ write_reg(sohandle, so, 0, 0xd1); write_reg(sohandle, so, 1, 0x00); write_reg(sohandle, so, 1, 0x0f); write_reg(sohandle, so, 1, 0x02); /* power (normal) */ write_reg(sohandle, so, 0, 0xd2); write_reg(sohandle, so, 1, 0x63); write_reg(sohandle, so, 1, 0x24); /* power (partial) */ write_reg(sohandle, so, 0, 0xd3); write_reg(sohandle, so, 1, 0x63); write_reg(sohandle, so, 1, 0x24); /* power (idle) */ write_reg(sohandle, so, 0, 0xd4); write_reg(sohandle, so, 1, 0x63); write_reg(sohandle, so, 1, 0x24); write_reg(sohandle, so, 0, 0xd8); write_reg(sohandle, so, 1, 0x77); write_reg(sohandle, so, 1, 0x77); /* TE signal */ write_reg(sohandle, so, 0, 0x35); write_reg(sohandle, so, 1, 0x00); /* TE signal line */ write_reg(sohandle, so, 0, 0x44); write_reg(sohandle, so, 1, 0x00); write_reg(sohandle, so, 1, 0x00); /* column address */ write_reg(sohandle, so, 0, 0x2a); write_reg(sohandle, so, 1, 0x00); write_reg(sohandle, so, 1, 0x00); write_reg(sohandle, so, 1, 0x00); write_reg(sohandle, so, 1, 0xef); /* page address */ write_reg(sohandle, so, 0, 0x2b); write_reg(sohandle, so, 1, 0x00); write_reg(sohandle, so, 1, 0x00); write_reg(sohandle, so, 1, 0x01); write_reg(sohandle, so, 1, 0x8f); /* exit sleep mode */ write_reg(sohandle, so, 0, 0x11); mdelay(120); /* clear vram */ clear_memory(sohandle, so); /* display ON */ write_reg(sohandle, so, 0, 0x29); mdelay(1); write_memory_start(sohandle, so); } int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { /* power on */ gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */ gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */ gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */ udelay(1100); gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */ udelay(10); gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */ mdelay(20); if (read_device_code(sohandle, so) != 0x01221517) return -ENODEV; pr_info("KFR2R09 WQVGA LCD Module detected.\n"); display_on(sohandle, so); return 0; } void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { write_memory_start(sohandle, so); }