# SPDX-License-Identifier: GPL-2.0
menu "Board support"
config SOLUTION_ENGINE
bool
config SH_ALPHA_BOARD
bool
config SH_CUSTOM_CLK
def_bool y
depends on !SH_DEVICE_TREE
select HAVE_LEGACY_CLK
config SH_DEVICE_TREE
bool
select OF
select OF_EARLY_FLATTREE
select TIMER_OF
select COMMON_CLK
select GENERIC_CALIBRATE_DELAY
config SH_JCORE_SOC
bool "J-Core SoC"
select SH_DEVICE_TREE
select CLKSRC_JCORE_PIT
select JCORE_AIC
depends on CPU_J2
help
Select this option to include drivers core components of the
J-Core SoC, including interrupt controllers and timers.
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
config SH_7206_SOLUTION_ENGINE
bool "SolutionEngine7206"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7206
help
Select 7206 SolutionEngine if configuring for a Hitachi SH7206
evaluation board.
config SH_7619_SOLUTION_ENGINE
bool "SolutionEngine7619"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7619
help
Select 7619 SolutionEngine if configuring for a Hitachi SH7619
evaluation board.
config SH_7721_SOLUTION_ENGINE
bool "SolutionEngine7721"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7721
help
Select 7721 SolutionEngine if configuring for a Hitachi SH7721
evaluation board.
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
config SH_7724_SOLUTION_ENGINE
bool "SolutionEngine7724"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7724
select GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select 7724 SolutionEngine if configuring for a Hitachi SH7724
evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select HAVE_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
select HD6446X_SERIES
depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
config SH_DREAMCAST
bool "Dreamcast"
select HAVE_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
select HAVE_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select HAVE_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
SME product line.
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select HAVE_PCI
select IO_TRAPPED if MMU
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_RSK
bool "Renesas Starter Kit"
depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select this option if configuring for any of the RSK+ MCU
evaluation platforms.
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
select HAVE_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
config SH_SDK7786
bool "SDK7786"
depends on CPU_SUBTYPE_SH7786
select HAVE_PCI
select NO_IOPORT_MAP if !PCI
select HAVE_SRAM_POOL
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select SDK7786 if configuring for a Renesas Technology Europe
SH7786-65nm board.
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select HAVE_PCI
select IO_TRAPPED if MMU
config SH_SH7757LCR
bool "SH7757LCR"
depends on CPU_SUBTYPE_SH7757
select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select HAVE_PCI
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
depends on SH_SH7785LCR && 29BIT
default y
help
This board has 2 physical memory maps. It can be changed with
DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
you can access all on-board device in 29bit address mode.
config SH_SH7785LCR_PT
bool "SH7785LCR prototype board on 32-bit MMU mode"
depends on SH_SH7785LCR && 32BIT
default n
help
If you use prototype board, this option is enabled.
config SH_URQUELL
bool "Urquell"
depends on CPU_SUBTYPE_SH7786
select GPIOLIB
select HAVE_PCI
select NO_IOPORT_MAP if !PCI
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
config SH_KFR2R09
bool "KFR2R09"
depends on CPU_SUBTYPE_SH7724
select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
"Kit For R2R for 2009" support.
config SH_ECOVEC
bool "EcoVec"
depends on CPU_SUBTYPE_SH7724
select GPIOLIB
select SND_SOC_DA7210 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Renesas "R0P7724LC0011/21RL (EcoVec)" support.
config SH_SH7763RDP
bool "SH7763RDP"
depends on CPU_SUBTYPE_SH7763
help
Select SH7763RDP if configuring for a Renesas SH7763
evaluation board.
config SH_ESPT
bool "ESPT"
depends on CPU_SUBTYPE_SH7763
help
Select ESPT if configuring for a Renesas SH7763
with gigabit ether evaluation board.
config SH_EDOSK7705
bool "EDOSK7705"
depends on CPU_SUBTYPE_SH7705
config SH_EDOSK7760
bool "EDOSK7760"
depends on CPU_SUBTYPE_SH7760
help
Select if configuring for a Renesas EDOSK7760
evaluation board.
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
depends on CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select HAVE_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select HAVE_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
config SH_SHMIN
bool "SHMIN"
depends on CPU_SUBTYPE_SH7706
select CPU_HAS_IPR_IRQ
help
Select SHMIN if configuring for the SHMIN board.
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
select HAVE_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
select NO_IOPORT_MAP if !PCI
select IRQ_DOMAIN
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
select GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Magic Panel R2 if configuring for Magic Panel R2.
config SH_POLARIS
bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7709
help
Select if configuring for an SMSC Polaris development board
config SH_SH2007
bool "SH-2007 board"
select NO_IOPORT_MAP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7780
help
SH-2007 is a single-board computer based around SH7780 chip
intended for embedded applications.
It has an Ethernet interface (SMC9118), direct connected
Compact Flash socket, two serial ports and PC-104 bus.
config SH_APSH4A3A
bool "AP-SH4A-3A"
select SH_ALPHA_BOARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7785
help
Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
config SH_APSH4AD0A
bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD
select HAVE_PCI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786
help
Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
source "arch/sh/boards/mach-r2d/Kconfig"
source "arch/sh/boards/mach-highlander/Kconfig"
source "arch/sh/boards/mach-sdk7780/Kconfig"
source "arch/sh/boards/mach-migor/Kconfig"
source "arch/sh/boards/mach-rsk/Kconfig"
if SH_MAGIC_PANEL_R2
menu "Magic Panel R2 options"
config SH_MAGIC_PANEL_R2_VERSION
int "Magic Panel R2 Version"
default "3"
help
Set the version of the Magic Panel R2
endmenu
endif
endmenu