# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller maintainers: - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: SLIMBus NGD controller is a light-weight driver responsible for communicating with SLIMBus slaves directly over the bus using messaging interface and communicating with master component residing on ADSP for bandwidth and data-channel management properties: compatible: enum: - qcom,slim-ngd-v1.5.0 # for MSM8996 - qcom,slim-ngd-v2.1.0 # for SDM845 reg: maxItems: 1 "#address-cells": const: 1 "#size-cells": const: 0 dmas: maxItems: 2 dma-names: items: - const: rx - const: tx interrupts: maxItems: 1 iommus: maxItems: 1 patternProperties: "^slim@[0-9a-f]+$": type: object $ref: slimbus.yaml# description: Each subnode represents an instance of NGD properties: reg: maxItems: 1 unevaluatedProperties: false required: - compatible - reg - "#address-cells" - "#size-cells" - dmas - dma-names - interrupts additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> slim-ngd@171c0000 { compatible = "qcom,slim-ngd-v2.1.0"; reg = <0x171c0000 0x2c000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; dmas = <&slimbam 3>, <&slimbam 4>; dma-names = "rx", "tx"; iommus = <&apps_smmu 0x1806 0x0>; #address-cells = <1>; #size-cells = <0>; slim@1 { reg = <1>; #address-cells = <2>; #size-cells = <0>; codec@1,0 { compatible = "slim217,250"; reg = <1 0>; slim-ifc-dev = <&wcd9340_ifd>; #sound-dai-cells = <1>; interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; #clock-cells = <0>; clock-frequency = <9600000>; clock-output-names = "mclk"; qcom,micbias1-microvolt = <1800000>; qcom,micbias2-microvolt = <1800000>; qcom,micbias3-microvolt = <1800000>; qcom,micbias4-microvolt = <1800000>; #address-cells = <1>; #size-cells = <1>; reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; /* Rest of the WCD9340 codec */ }; }; };