# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller on APQ8084 maintainers: - Stephen Boyd <sboyd@kernel.org> - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power domains on APQ8084. See also:: include/dt-bindings/clock/qcom,gcc-apq8084.h include/dt-bindings/reset/qcom,gcc-apq8084.h allOf: - $ref: qcom,gcc.yaml# properties: compatible: const: qcom,gcc-apq8084 clocks: items: - description: XO source - description: Sleep clock source - description: UFS RX symbol 0 clock - description: UFS RX symbol 1 clock - description: UFS TX symbol 0 clock - description: UFS TX symbol 1 clock - description: SATA ASIC0 clock - description: SATA RX clock - description: PCIe PIPE clock clock-names: items: - const: xo - const: sleep_clk - const: ufs_rx_symbol_0_clk_src - const: ufs_rx_symbol_1_clk_src - const: ufs_tx_symbol_0_clk_src - const: ufs_tx_symbol_1_clk_src - const: sata_asic0_clk - const: sata_rx_clk - const: pcie_pipe required: - compatible unevaluatedProperties: false examples: - | /* UFS PHY on APQ8084 is not supported (yet), so these bindings just serve an example */ clock-controller@fc400000 { compatible = "qcom,gcc-apq8084"; reg = <0xfc400000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; clocks = <&xo_board>, <&sleep_clk>, <&ufsphy 0>, <&ufsphy 1>, <&ufsphy 2>, <&ufsphy 3>, <&sata 0>, <&sata 1>, <&pcie_phy>; clock-names = "xo", "sleep_clk", "ufs_rx_symbol_0_clk_src", "ufs_rx_symbol_1_clk_src", "ufs_tx_symbol_0_clk_src", "ufs_tx_symbol_1_clk_src", "sata_asic0_clk", "sata_rx_clk", "pcie_pipe"; }; ...