#ifndef __DRIVERS_USB_CHIPIDEA_OTG_FSM_H
#define __DRIVERS_USB_CHIPIDEA_OTG_FSM_H
#include <linux/usb/otg-fsm.h>
#define TA_WAIT_VRISE (100) /* a_wait_vrise: section 7.1.2
* a_wait_vrise_tmr: section 7.4.5.1
* TA_VBUS_RISE <= 100ms, section 4.4
* Table 4-1: Electrical Characteristics
* ->DC Electrical Timing
*/
#define TA_WAIT_VFALL (1000) /* a_wait_vfall: section 7.1.7
* a_wait_vfall_tmr: section: 7.4.5.2
*/
#define TA_WAIT_BCON (10000) /* a_wait_bcon: section 7.1.3
* TA_WAIT_BCON: should be between 1100
* and 30000 ms, section 5.5, Table 5-1
*/
#define TA_AIDL_BDIS (5000) /* a_suspend min 200 ms, section 5.2.1
* TA_AIDL_BDIS: section 5.5, Table 5-1
*/
#define TA_BIDL_ADIS (500) /* TA_BIDL_ADIS: section 5.2.1
* 500ms is used for B switch to host
* for safe
*/
#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms
* section:5.1.3
*/
#define TB_SRP_FAIL (6000) /* b_srp_init,fail time 5~6s
* section:5.1.6
*/
#define TB_ASE0_BRST (155) /* minimum 155 ms, section:5.3.1 */
#define TB_SE0_SRP (1000) /* b_idle,minimum 1s, section:5.1.2 */
#define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */
#define TB_AIDL_BDIS (20) /* 4ms ~ 150ms, section 5.2.1 */
#if IS_ENABLED(CONFIG_USB_OTG_FSM)
int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
int ci_otg_fsm_work(struct ci_hdrc *ci);
irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci);
void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci);
void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci);
#else
static inline int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
{
return 0;
}
static inline int ci_otg_fsm_work(struct ci_hdrc *ci)
{
return -ENXIO;
}
static inline irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci)
{
return IRQ_NONE;
}
static inline void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci)
{
}
static inline void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci)
{
}
#endif
#endif /* __DRIVERS_USB_CHIPIDEA_OTG_FSM_H */