Directory Files
.. 21
File Size
Kconfig 18 kB
Makefile 2.9 kB
adis16201.c 8.5 kB
adis16201.mod.c 0 B
adis16209.c 8.6 kB
adis16209.mod.c 0 B
adxl313.h 2.5 kB
adxl313_core.c 12 kB
adxl313_core.mod.c 0 B
adxl313_i2c.c 2.6 kB
adxl313_i2c.mod.c 0 B
adxl313_spi.c 3.5 kB
adxl313_spi.mod.c 0 B
adxl345.h 350 B
adxl345_core.c 7.4 kB
adxl345_i2c.c 1.8 kB
adxl345_spi.c 2.0 kB
adxl355.h 853 B
adxl355_core.c 20 kB
adxl355_core.mod.c 0 B
adxl355_i2c.c 1.9 kB
adxl355_i2c.mod.c 0 B
adxl355_spi.c 2.0 kB
adxl355_spi.mod.c 0 B
adxl367.c 37 kB
adxl367.h 500 B
adxl367.mod.c 0 B
adxl367_i2c.c 2.1 kB
adxl367_i2c.mod.c 0 B
adxl367_spi.c 4.4 kB
adxl367_spi.mod.c 0 B
adxl372.c 34 kB
adxl372.h 388 B
adxl372.mod.c 0 B
adxl372_i2c.c 1.7 kB
adxl372_i2c.mod.c 0 B
adxl372_spi.c 1.5 kB
adxl372_spi.mod.c 0 B
bma180.c 29 kB
bma220_spi.c 7.9 kB
bma220_spi.mod.c 0 B
bma400.h 4.8 kB
bma400_core.c 44 kB
bma400_core.mod.c 0 B
bma400_i2c.c 1.4 kB
bma400_i2c.mod.c 0 B
bma400_spi.c 2.9 kB
bma400_spi.mod.c 0 B
bmc150-accel-core.c 50 kB
bmc150-accel-core.mod.c 0 B
bmc150-accel-i2c.c 8.1 kB
bmc150-accel-i2c.mod.c 0 B
bmc150-accel-spi.c 2.0 kB
bmc150-accel-spi.mod.c 0 B
bmc150-accel.h 2.7 kB
bmi088-accel-core.c 16 kB
bmi088-accel-core.mod.c 0 B
bmi088-accel-spi.c 2.5 kB
bmi088-accel-spi.mod.c 0 B
bmi088-accel.h 567 B
cros_ec_accel_legacy.c 7.0 kB
cros_ec_accel_legacy.mod.c 0 B
da280.c 4.7 kB
da280.mod.c 0 B
da311.c 7.3 kB
da311.mod.c 0 B
dmard06.c 5.7 kB
dmard06.mod.c 0 B
dmard09.c 3.5 kB
dmard09.mod.c 0 B
dmard10.c 6.5 kB
dmard10.mod.c 0 B
fxls8962af-core.c 33 kB
fxls8962af-core.mod.c 0 B
fxls8962af-i2c.c 1.5 kB
fxls8962af-i2c.mod.c 0 B
fxls8962af-spi.c 1.5 kB
fxls8962af-spi.mod.c 0 B
fxls8962af.h 532 B
hid-sensor-accel-3d.c 13 kB
hid-sensor-accel-3d.mod.c 0 B
kionix-kx022a-i2c.c 1.2 kB
kionix-kx022a-i2c.mod.c 0 B
kionix-kx022a-spi.c 1.4 kB
kionix-kx022a-spi.mod.c 0 B
kionix-kx022a.c 28 kB
kionix-kx022a.h 2.1 kB
kionix-kx022a.mod.c 0 B
kxcjk-1013.c 43 kB
kxcjk-1013.mod.c 0 B
kxsd9-i2c.c 1.4 kB
kxsd9-i2c.mod.c 0 B
kxsd9-spi.c 1.5 kB
kxsd9-spi.mod.c 0 B
kxsd9.c 12 kB
kxsd9.h 349 B
kxsd9.mod.c 0 B
mc3230.c 4.8 kB
mc3230.mod.c 0 B
mma7455.h 424 B
mma7455_core.c 7.5 kB
mma7455_core.mod.c 0 B
mma7455_i2c.c 1.5 kB
mma7455_i2c.mod.c 0 B
mma7455_spi.c 1.2 kB
mma7455_spi.mod.c 0 B
mma7660.c 6.6 kB
mma7660.mod.c 0 B
mma8452.c 48 kB
mma8452.mod.c 0 B
mma9551.c 15 kB
mma9551.mod.c 0 B
mma9551_core.c 22 kB
mma9551_core.h 2.6 kB
mma9551_core.mod.c 0 B
mma9553.c 32 kB
mma9553.mod.c 0 B
msa311.c 37 kB
msa311.mod.c 0 B
mxc4005.c 11 kB
mxc4005.mod.c 0 B
mxc6255.c 4.4 kB
mxc6255.mod.c 0 B
sca3000.c 43 kB
sca3000.mod.c 0 B
sca3300.c 18 kB
sca3300.mod.c 0 B
ssp_accel_sensor.c 3.8 kB
ssp_accel_sensor.mod.c 0 B
st_accel.h 1.9 kB
st_accel.mod.c 0 B
st_accel_buffer.c 1.6 kB
st_accel_core.c 32 kB
st_accel_i2c.c 4.9 kB
st_accel_i2c.mod.c 0 B
st_accel_spi.c 4.2 kB
st_accel_spi.mod.c 0 B
stk8312.c 16 kB
stk8312.mod.c 0 B
stk8ba50.c 14 kB
stk8ba50.mod.c 0 B

Linux v6.6.1 - accel

# SPDX-License-Identifier: GPL-2.0-only
#
# Accelerometer drivers
#
# When adding new entries keep the list in alphabetical order

menu "Accelerometers"

config ADIS16201
	tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
	depends on SPI
	select IIO_ADIS_LIB
	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
	help
	  Say Y here to build support for Analog Devices adis16201 dual-axis
	  digital inclinometer and accelerometer.

	  To compile this driver as a module, say M here: the module will
	  be called adis16201.

config ADIS16209
	tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
	depends on SPI
	select IIO_ADIS_LIB
	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
	help
	  Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
	  and accelerometer.

	  To compile this driver as a module, say M here: the module will be
	  called adis16209.

config ADXL313
	tristate

config ADXL313_I2C
	tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer I2C Driver"
	depends on I2C
	select ADXL313
	select REGMAP_I2C
	help
	  Say Y here if you want to build i2c support for the Analog Devices
	  ADXL313 3-axis digital accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called adxl313_i2c and you will also get adxl313_core
	  for the core module.

config ADXL313_SPI
	tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer SPI Driver"
	depends on SPI
	select ADXL313
	select REGMAP_SPI
	help
	  Say Y here if you want to build spi support for the Analog Devices
	  ADXL313 3-axis digital accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called adxl313_spi and you will also get adxl313_core
	  for the core module.

config ADXL345
	tristate

config ADXL345_I2C
	tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver"
	depends on INPUT_ADXL34X=n
	depends on I2C
	select ADXL345
	select REGMAP_I2C
	help
	  Say Y here if you want to build support for the Analog Devices
	  ADXL345 or ADXL375 3-axis digital accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called adxl345_i2c and you will also get adxl345_core
	  for the core module.

config ADXL345_SPI
	tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver"
	depends on INPUT_ADXL34X=n
	depends on SPI
	select ADXL345
	select REGMAP_SPI
	help
	  Say Y here if you want to build support for the Analog Devices
	  ADXL345 or ADXL375 3-axis digital accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called adxl345_spi and you will also get adxl345_core
	  for the core module.

config ADXL355
	tristate

config ADXL355_I2C
	tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer I2C Driver"
	depends on I2C
	select ADXL355
	select REGMAP_I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build i2c support for the Analog Devices
	  ADXL355 3-axis digital accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called adxl355_i2c and you will also get adxl355_core
	  for the core module.

config ADXL355_SPI
	tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer SPI Driver"
	depends on SPI
	select ADXL355
	select REGMAP_SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build spi support for the Analog Devices
	  ADXL355 3-axis digital accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called adxl355_spi and you will also get adxl355_core
	  for the core module.

config ADXL367
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

config ADXL367_SPI
	tristate "Analog Devices ADXL367 3-Axis Accelerometer SPI Driver"
	depends on SPI
	select ADXL367
	select REGMAP_SPI
	help
	  Say yes here to add support for the Analog Devices ADXL367 triaxial
	  acceleration sensor.
	  To compile this driver as a module, choose M here: the
	  module will be called adxl367_spi.

config ADXL367_I2C
	tristate "Analog Devices ADXL367 3-Axis Accelerometer I2C Driver"
	depends on I2C
	select ADXL367
	select REGMAP_I2C
	help
	  Say yes here to add support for the Analog Devices ADXL367 triaxial
	  acceleration sensor.
	  To compile this driver as a module, choose M here: the
	  module will be called adxl367_i2c.

config ADXL372
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

config ADXL372_SPI
	tristate "Analog Devices ADXL372 3-Axis Accelerometer SPI Driver"
	depends on SPI
	select ADXL372
	select REGMAP_SPI
	help
	  Say yes here to add support for the Analog Devices ADXL372 triaxial
	  acceleration sensor.
	  To compile this driver as a module, choose M here: the
	  module will be called adxl372_spi.

config ADXL372_I2C
	tristate "Analog Devices ADXL372 3-Axis Accelerometer I2C Driver"
	depends on I2C
	select ADXL372
	select REGMAP_I2C
	help
	  Say yes here to add support for the Analog Devices ADXL372 triaxial
	  acceleration sensor.
	  To compile this driver as a module, choose M here: the
	  module will be called adxl372_i2c.

config BMA180
	tristate "Bosch BMA023/BMA1x0/BMA250 3-Axis Accelerometer Driver"
	depends on I2C && INPUT_BMA150=n
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build a driver for the Bosch BMA023, BMA150
	  BMA180, BMA250 or SMB380 triaxial acceleration sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called bma180.

config BMA220
	tristate "Bosch BMA220 3-Axis Accelerometer Driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to add support for the Bosch BMA220 triaxial
	  acceleration sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called bma220_spi.

config BMA400
	tristate "Bosch BMA400 3-Axis Accelerometer Driver"
	select REGMAP
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select BMA400_I2C if I2C
	select BMA400_SPI if SPI
	help
	  Say Y here if you want to build a driver for the Bosch BMA400
	  triaxial acceleration sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called bma400_core and you will also get
	  bma400_i2c if I2C is enabled and bma400_spi if SPI is
	  enabled.

config BMA400_I2C
	tristate
	depends on BMA400

config BMA400_SPI
	tristate
	depends on BMA400

config BMC150_ACCEL
	tristate "Bosch BMC150 Accelerometer Driver"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP
	select BMC150_ACCEL_I2C if I2C
	select BMC150_ACCEL_SPI if SPI
	help
	  Say yes here to build support for the following Bosch accelerometers:
	  BMA222, BMA222E, BMA250E, BMA253, BMA254, BMA255, BMA280, BMC150, BMC156
	  BMI055.

	  Note that some of these are combo modules:
	    - BMC150/BMC156: accelerometer and magnetometer
	    - BMI055: accelerometer and gyroscope

	  This driver is only implementing accelerometer part, which has
	  its own address and register map.

config BMC150_ACCEL_I2C
	tristate
	select REGMAP_I2C

config BMC150_ACCEL_SPI
	tristate
	select REGMAP_SPI

config BMI088_ACCEL
	tristate "Bosch BMI088 Accelerometer Driver"
	depends on SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP
	select BMI088_ACCEL_SPI
	help
	  Say yes here to build support for the Bosch BMI088 accelerometer.

	  This is a combo module with both accelerometer and gyroscope. This
	  driver only implements the accelerometer part, which has its own
	  address and register map. BMG160 provides the gyroscope driver.

config BMI088_ACCEL_SPI
	tristate
	select REGMAP_SPI

config DA280
	tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
	depends on I2C
	help
	  Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit
	  digital accelerometer.

	  To compile this driver as a module, choose M here: the
	  module will be called da280.

config DA311
	tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver"
	depends on I2C
	help
	  Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit
	  digital accelerometer.

	  To compile this driver as a module, choose M here: the
	  module will be called da311.

config DMARD06
	tristate "Domintech DMARD06 Digital Accelerometer Driver"
	depends on I2C
	help
	  Say yes here to build support for the Domintech low-g tri-axial
	  digital accelerometers: DMARD05, DMARD06, DMARD07.

	  To compile this driver as a module, choose M here: the
	  module will be called dmard06.

config DMARD09
	tristate "Domintech DMARD09 3-axis Accelerometer Driver"
	depends on I2C
	help
	  Say yes here to get support for the Domintech DMARD09 3-axis
	  accelerometer.

	  Choosing M will build the driver as a module. If so, the module
	  will be called dmard09.

config DMARD10
	tristate "Domintech DMARD10 3-axis Accelerometer Driver"
	depends on I2C
	help
	  Say yes here to get support for the Domintech DMARD10 3-axis
	  accelerometer.

	  Choosing M will build the driver as a module. If so, the module
	  will be called dmard10.

config FXLS8962AF
	tristate
	depends on I2C || !I2C # cannot be built-in for modular I2C

config FXLS8962AF_I2C
	tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer I2C Driver"
	depends on I2C
	select FXLS8962AF
	select REGMAP_I2C
	help
	  Say yes here to build support for the NXP 3-axis automotive
	  accelerometer FXLS8962AF/FXLS8964AF with I2C support.

	  To compile this driver as a module, choose M here: the module
	  will be called fxls8962af_i2c.

config FXLS8962AF_SPI
	tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer SPI Driver"
	depends on SPI
	depends on I2C || !I2C
	select FXLS8962AF
	select REGMAP_SPI
	help
	  Say yes here to build support for the NXP 3-axis automotive
	  accelerometer FXLS8962AF/FXLS8964AF with SPI support.

	  To compile this driver as a module, choose M here: the module
	  will be called fxls8962af_spi.

config HID_SENSOR_ACCEL_3D
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID Accelerometers 3D"
	help
	  Say yes here to build support for the HID SENSOR
	  accelerometers 3D.

	  To compile this driver as a module, choose M here: the
	  module will be called hid-sensor-accel-3d.

config IIO_CROS_EC_ACCEL_LEGACY
	tristate "ChromeOS EC Legacy Accelerometer Sensor"
	depends on IIO_CROS_EC_SENSORS_CORE
	help
	  Say yes here to get support for accelerometers on Chromebook using
	  legacy EC firmware.
	  Sensor data is retrieved through IO memory.
	  Newer devices should use IIO_CROS_EC_SENSORS.

config IIO_ST_ACCEL_3AXIS
	tristate "STMicroelectronics accelerometers 3-Axis Driver"
	depends on (I2C || SPI_MASTER) && SYSFS
	depends on !SENSORS_LIS3_I2C
	depends on !SENSORS_LIS3_SPI
	select IIO_ST_SENSORS_CORE
	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
	help
	  Say yes here to build support for STMicroelectronics accelerometers:
	  LSM303C, LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
	  LNG2DM, LIS3DE, LIS2DE12, LIS2HH12

	  Also need to enable at least one of I2C and SPI interface drivers
	  below.

config IIO_ST_ACCEL_I2C_3AXIS
	tristate "STMicroelectronics accelerometers 3-Axis I2C Interface"
	depends on I2C && IIO_ST_ACCEL_3AXIS
	default I2C && IIO_ST_ACCEL_3AXIS
	select IIO_ST_SENSORS_I2C
	help
	  Build support for STMicroelectronics accelerometers I2C interface.

	  To compile this driver as a module, choose M here. The module
	  will be called st_accel_i2c.

config IIO_ST_ACCEL_SPI_3AXIS
	tristate "STMicroelectronics accelerometers 3-Axis SPI Interface"
	depends on SPI_MASTER && IIO_ST_ACCEL_3AXIS
	default SPI_MASTER && IIO_ST_ACCEL_3AXIS
	select IIO_ST_SENSORS_SPI
	help
	  Build support for STMicroelectronics accelerometers SPI interface.

	  To compile this driver as a module, choose M here. The module
	  will be called st_accel_spi.

config IIO_KX022A
	tristate

config IIO_KX022A_SPI
	tristate "Kionix KX022A tri-axis digital accelerometer SPI interface"
	depends on SPI
	select IIO_KX022A
	select REGMAP_SPI
	help
	  Enable support for the Kionix KX022A digital tri-axis
	  accelerometer connected to I2C interface.

config IIO_KX022A_I2C
	tristate "Kionix KX022A tri-axis digital accelerometer I2C interface"
	depends on I2C
	select IIO_KX022A
	select REGMAP_I2C
	help
	  Enable support for the Kionix KX022A digital tri-axis
	  accelerometer connected to I2C interface.

config KXSD9
	tristate "Kionix KXSD9 Accelerometer Driver"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to build support for the Kionix KXSD9 accelerometer.
	  It can be accessed using an (optional) SPI or I2C interface.

	  To compile this driver as a module, choose M here: the module
	  will be called kxsd9.

config KXSD9_SPI
	tristate "Kionix KXSD9 SPI transport"
	depends on KXSD9
	depends on SPI
	default KXSD9
	select REGMAP_SPI
	help
	  Say yes here to enable the Kionix KXSD9 accelerometer
	  SPI transport channel.

config KXSD9_I2C
	tristate "Kionix KXSD9 I2C transport"
	depends on KXSD9
	depends on I2C
	default KXSD9
	select REGMAP_I2C
	help
	  Say yes here to enable the Kionix KXSD9 accelerometer
	  I2C transport channel.

config KXCJK1013
	tristate "Kionix 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
	  triaxial acceleration sensor. This driver also supports KXCJ9-1008,
	  KXTJ2-1009 and KXTF9.

	  To compile this driver as a module, choose M here: the module will
	  be called kxcjk-1013.

config MC3230
	tristate "mCube MC3230 Digital Accelerometer Driver"
	depends on I2C
	help
	  Say yes here to build support for the mCube MC3230 low-g tri-axial
	  digital accelerometer.

	  To compile this driver as a module, choose M here: the
	  module will be called mc3230.

config MMA7455
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

config MMA7455_I2C
	tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
	depends on I2C
	select MMA7455
	select REGMAP_I2C
	help
	  Say yes here to build support for the Freescale MMA7455L and
	  MMA7456L 3-axis accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called mma7455_i2c.

config MMA7455_SPI
	tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
	depends on SPI_MASTER
	select MMA7455
	select REGMAP_SPI
	help
	  Say yes here to build support for the Freescale MMA7455L and
	  MMA7456L 3-axis accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called mma7455_spi.

config MMA7660
	tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
	depends on I2C
	help
	  Say yes here to get support for the Freescale MMA7660FC 3-Axis
	  accelerometer.

	  Choosing M will build the driver as a module. If so, the module
	  will be called mma7660.

config MMA8452
	tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to build support for the following Freescale / NXP 3-axis
	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
	  FXLS8471Q.

	  To compile this driver as a module, choose M here: the module
	  will be called mma8452.

config MMA9551_CORE
	tristate

config MMA9551
	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
	depends on I2C
	select MMA9551_CORE

	help
	  Say yes here to build support for the Freescale MMA9551L
	  Intelligent Motion-Sensing Platform Driver.

	  To compile this driver as a module, choose M here: the module
	  will be called mma9551.

config MMA9553
	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
	depends on I2C
	select MMA9551_CORE
	help
	  Say yes here to build support for the Freescale MMA9553L
	  Intelligent Pedometer Platform Driver.

	  To compile this driver as a module, choose M here: the module
	  will be called mma9553.

config MSA311
	tristate "MEMSensing Digital 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP_I2C
	help
	  Say yes here to build support for the MEMSensing MSA311
	  accelerometer driver.

	  To compile this driver as a module, choose M here: the module will be
	  called msa311.

config MXC4005
	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP_I2C
	help
	  Say yes here to build support for the Memsic MXC4005XC 3-axis
	  accelerometer.

	  To compile this driver as a module, choose M. The module will be
	  called mxc4005.

config MXC6255
	tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
	depends on I2C
	select REGMAP_I2C
	help
	  Say yes here to build support for the Memsic MXC6255 Orientation
	  Sensing Accelerometer Driver.

	  To compile this driver as a module, choose M here: the module will be
	  called mxc6255.

config SCA3000
	select IIO_BUFFER
	select IIO_KFIFO_BUF
	depends on SPI
	tristate "VTI SCA3000 series accelerometers"
	help
	  Say Y here to build support for the VTI SCA3000 series of SPI
	  accelerometers. These devices use a hardware ring buffer.

	  To compile this driver as a module, say M here: the module will be
	  called sca3000.

config SCA3300
	tristate "Murata SCA3300 3-Axis Accelerometer Driver"
	depends on SPI
	select CRC8
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to build support for Murata SCA3300 3-Axis
	  accelerometer.

	  To compile this driver as a module, choose M here: the module will be
	  called sca3300.

config STK8312
	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to get support for the Sensortek STK8312 3-axis
	  accelerometer.

	  Choosing M will build the driver as a module. If so, the module
	  will be called stk8312.

config STK8BA50
	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to get support for the Sensortek STK8BA50 3-axis
	  accelerometer.

	  Choosing M will build the driver as a module. If so, the module
	  will be called stk8ba50.

endmenu