/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Driver for Realtek PCI-Express card reader
 *
 * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
 *
 * Author:
 *   Wei WANG (wei_wang@realsil.com.cn)
 *   Micky Ching (micky_ching@realsil.com.cn)
 */

#ifndef __REALTEK_RTSX_H
#define __REALTEK_RTSX_H

#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/cdrom.h>
#include <linux/workqueue.h>
#include <linux/timer.h>
#include <linux/time64.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_devinfo.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>

#define CR_DRIVER_NAME		"rts5208"

/*
 * macros for easy use
 */
#define rtsx_writel(chip, reg, value) \
	iowrite32(value, (chip)->rtsx->remap_addr + reg)
#define rtsx_readl(chip, reg) \
	ioread32((chip)->rtsx->remap_addr + reg)
#define rtsx_writew(chip, reg, value) \
	iowrite16(value, (chip)->rtsx->remap_addr + reg)
#define rtsx_readw(chip, reg) \
	ioread16((chip)->rtsx->remap_addr + reg)
#define rtsx_writeb(chip, reg, value) \
	iowrite8(value, (chip)->rtsx->remap_addr + reg)
#define rtsx_readb(chip, reg) \
	ioread8((chip)->rtsx->remap_addr + reg)

#define rtsx_read_config_byte(chip, where, val) \
	pci_read_config_byte((chip)->rtsx->pci, where, val)

#define rtsx_write_config_byte(chip, where, val) \
	pci_write_config_byte((chip)->rtsx->pci, where, val)

#define wait_timeout_x(task_state, msecs)	\
do {						\
	set_current_state((task_state));	\
	schedule_timeout((msecs) * HZ / 1000);	\
} while (0)
#define wait_timeout(msecs)	wait_timeout_x(TASK_INTERRUPTIBLE, (msecs))

#define STATE_TRANS_NONE	0
#define STATE_TRANS_CMD		1
#define STATE_TRANS_BUF		2
#define STATE_TRANS_SG		3

#define TRANS_NOT_READY		0
#define TRANS_RESULT_OK		1
#define TRANS_RESULT_FAIL	2

#define SCSI_LUN(srb)		((srb)->device->lun)

struct rtsx_chip;

struct rtsx_dev {
	struct pci_dev *pci;

	/* pci resources */
	unsigned long		addr;
	void __iomem		*remap_addr;
	int irq;

	/* locks */
	spinlock_t		reg_lock;

	struct task_struct	*ctl_thread;	 /* the control thread   */
	struct task_struct	*polling_thread; /* the polling thread   */

	/* mutual exclusion and synchronization structures */
	struct completion	cmnd_ready;	 /* to sleep thread on	    */
	struct completion	control_exit;	 /* control thread exit	    */
	struct completion	polling_exit;	 /* polling thread exit	    */
	struct completion	notify;		 /* thread begin/end	    */
	struct completion	scanning_done;	 /* wait for scan thread    */

	wait_queue_head_t	delay_wait;	 /* wait during scan, reset */
	struct mutex		dev_mutex;

	/* host reserved buffer */
	void			*rtsx_resv_buf;
	dma_addr_t		rtsx_resv_buf_addr;

	char			trans_result;
	char			trans_state;

	struct completion	*done;
	/* Whether interrupt handler should care card cd info */
	u32			check_card_cd;

	struct rtsx_chip	*chip;
};

/* Convert between rtsx_dev and the corresponding Scsi_Host */
static inline struct Scsi_Host *rtsx_to_host(struct rtsx_dev *dev)
{
	return container_of((void *)dev, struct Scsi_Host, hostdata);
}

static inline struct rtsx_dev *host_to_rtsx(struct Scsi_Host *host)
{
	return (struct rtsx_dev *)host->hostdata;
}

/*
 * The scsi_lock() and scsi_unlock() macros protect the sm_state and the
 * single queue element srb for write access
 */
#define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
#define scsi_lock(host)		spin_lock_irq(host->host_lock)

#define lock_state(chip)	spin_lock_irq(&((chip)->rtsx->reg_lock))
#define unlock_state(chip)	spin_unlock_irq(&((chip)->rtsx->reg_lock))

/* struct scsi_cmnd transfer buffer access utilities */
enum xfer_buf_dir	{TO_XFER_BUF, FROM_XFER_BUF};

#include "rtsx_chip.h"
#include "rtsx_transport.h"
#include "rtsx_scsi.h"
#include "rtsx_card.h"
#include "rtsx_sys.h"
#include "general.h"

#endif  /* __REALTEK_RTSX_H */